Speaker Size - Marantz DV9600 User Manual

6 DVD Setup Menu

Speaker Size

• Default setting: Front L/R: Large | Center:
Large | LFE: On | Surround L/R: Large
You only need to make this setting if you connected
this player to your amplifier using the 5.1 channel
analog outputs. This setting does not affect digital
audio output.
Follow the on-screen displays to describe which
speakers are in your system and their sizes and
positions.
Set the size of your speakers in the Speaker Size
screen. The front left/right (L/R), center (C) and
surround left/right (LS/RS) speakers can each be
set to Large, Small or Off. Set a speaker to Large
if the main speaker cone is 12cm or more; set to
Small if it's less than 12cm.
The subwoofer (LFE) can only be set to On or
Off.
The graphic of the screen represents your speaker
setup, with the currently selected speaker's name
highlighted in yellow.
Cursor buttons (2/3): Speaker Change
Cursor buttons (5/∞): Size Change
Note
• Selecting Initial from on-screen will cause all
settings to return to their default settings.
• For DVD-Audio and DTS-CD, if the C, LS or RS
speakers is set to Off, the audio is automatically
down mixed to stereo.
• This setting cannot be chosen when i.LINK is
connected or when HDMI is connected while
either Auto or Multi PCM selected for the
HDMI audio setting. (pages 54, 55)
40
Press ENTER
Distance
• Default setting: Unit: Feet | Distance: 10 feet
Set the distance from your main listening position
to each speaker in the Distance screen. The
distance setting for any speaker that was set to
Off in the Speaker Size screen will be disappeared.
For the other speakers, enter the distance to the
nearest 1 feet (0.3m). You can set the distance for
the L/R speakers between 1.0 feet (0.3m) and 40
feet (12m). Note that you must set the C and SW
speakers within 15 feet (4.5m) of the L/R setting.
The LS and RS speakers must be set within –15
feet (–4.5m) and +15 feet (+4.5m) of the L/R
setting.
The graphic of the screen represents your speaker
setup, with the currently selected speaker's name
highlighted in yellow.
Press ENTER
Cursor buttons (2/3): Speaker Change
Cursor buttons (5/∞): Distance
Change
Note
• If your subwoofer is placed beyond the adjust-
ment range (L/R 15 feet (4.5m)), set to the
nearest setting possible. Surround sound
cohesion should not be affected very much.
• Selecting Initial from on-screen will cause all
settings to return to their default settings.
• It is possible to also set Distance for Super
Audio CD by setting Super Audio CD Play to
PCM (page 44).
• This setting cannot be chosen when i.LINK is
connected or when HDMI is connected while
either Auto or Multi PCM selected for the
HDMI audio setting. (pages 54, 55)