Keurig K-CUP K150P Setup Manual page 2

Once the external filter is mounted to
4
either the brewer or wall, connect the
filter to the Inlet Plumbing Port by using
a 3/4 BSP Tap Adapter and turn on the
water supply.
DO NOT lift the handle while heating
or brewing.
www.keurig.co.uk
Ready
Choose Your
K-Cup ® Pack &
Lift Handle
Español
Press and release the Wait until the screen indicates
5 6
power switch. "READY" (~4 minutes).
DO NOT remove or puncture the foil lid of the
K-Cup ® pack.
WATER
LEVEL
4
Français
7
NOTE: If your brewer has been exposed to
temperatures below freezing, we recommend you
allow two hours for an unpacked brewer to warm
to room temperature before powering on.
Lift and lower the handle. DO NOT insert a
K-Cup pack. Select a brew size then press
®
the flashing BREW Button to start a cleansing
brew. Hot water will flow into your mug.
Once finished, pour the hot
8
water into the sink.
Remove used K-Cup ® pack after brewing.
CAUTION: K-Cup ® pack will be hot.