GB
Change the
micro waste air filter
Cleaning
52
After use
NOTE!
Change the micro main filters at the latest after using 5
bags.
1. Open the filter cover.
2. Remove the old micro waste air filter and insert the new
one.
3. Close the filter cover.
WARNING!
Switch the floor vacuum cleaner off and disconnect
the mains plug before starting to clean. In this way you will
avoid the appliance from being switched on accidentally.
CAUTION!
Do not use any cleaning agents or scouring agents that
contain alcohol as this will damage the housing.
Only clean the appliance with a dry or damp cloth.
If necessary, you can also clean the filter chamber with a
damp cloth.
Vacuum cleaning accessories such as the hose, pipes and
nozzles should be regularly checked for blockages and
cleaned, wiped out and dried.
If the appliance stops working satisfactorily (reduced sucti-
on power, unusual noises or failure), check first to see if the
filter is full or soiled or if the suction channels are blocked.