GB
Work breaks
After vacuum cleaning
1
3
48
48
Use the park holder to securely attach the suction pipe du-
ring a work break.
To do this, insert the park holder of the floor suction nozzle
into the nozzle holder [1].
1
Perform the following steps as soon as you stop vacuum
cleaning. Never leave the appliance unattended.
● Press the foot button "On/Off" [1] to switch off the floor va-
cuum cleaner.
2
● Disconnect the plug from the mains socket.
● Press the foot button "cable rewind" [2] to retract the ca-
ble. Guide the cable with your hand until the cable has
been completely wound up and the plug is in the opening
[3].
● Use the suction pipe holder to carry and position the ap-
pliance. To do this, insert the suction pipe holder of the te-
lescopic pipe into the holder on the underneath of the ap-
pliances.
● Store the floor vacuum cleaner in a place out of the reach
of children.
Do not place the appliance next to heat sources and avoid
direct sunshine. Heat can damage the floor vacuum
cleaner.
Operation
WARNING!
CAUTION!