Audio Setting; Speaker Setting - Marantz DV6400 User Manual

DVD SETUP

Audio Setting

Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
1
Press the SETUP button in STOP mode.
2
Press the B button to select CUSTOM, then press
the ENTER button.
• CUSTOM mode will appear.
3 Press the s or B button to
select AUDIO, then the ENTER
button to confirm.
4
Press the K or L button to select the below items,
then press the ENTER button.
DRC (Dynamic Range Control)
(Default : OFF)
• To compress the range of sound
volume.
DOLBY DIGITAL (Default : ON)
QUICK
Set to ON when the player is con-
nected to Dolby Digital Decoder.
ON : Output by Dolby Digital
OFF: Convert the Dolby Digital to
PCM
DTS (Default : PCM)
DTS: Output by DTS sound
Set to DTS when the unit is
connected to DTS Decoder.
PCM: Convert the Dolby Digital to
PCM
DOWN SAMPLING (Default : ON)
• Set to ON when outputting in
48kHz.
When playing disc with copright Protection
• Even If you select OFF, copyright protection will be acti-
vated and sound will be down sampled at 48kHz.
ANALOG (Default : 2.0 CH)
2.0 CH : Output 2ch sound
5.1 CH : Output Multi channel sound
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
ANALOG
SACD
SACD (Default : MULTI-CH)
2 CH : Playback a 2ch area.
MULTI-CH : Playback a multi-ch area.
CD AREA : Playback a CD area.
• When choosing MULTI-CH, choose 5.1CH as well as the
audio channel in the audio setting of the setup menu.
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
ANALOG
SACD
5
Press the SETUP button to exit.
AUDIO
DRC OFF
DOLBY DIGITAL ON
DTS PCM
DOWN SAMPLING ON
ANALOG 2.0 CH
SACD MULTI-CH
AUDIO
DRC OFF
DOLBY DIGITAL ON
DTS PCM
DOWN SAMPLING ON
ANALOG 2.0 CH
SACD MULTI-CH
AUDIO
DRC OFF
DOLBY DIGITAL ON
DTS PCM
DOWN SAMPLING ON
ANALOG 2.0 CH
SACD MULTI-CH
AUDIO
DRC OFF
DOLBY DIGITAL ON
DTS PCM
DOWN SAMPLING ON
ANALOG 2.0 CH
SACD MULTI-CH
AUDIO
DRC OFF
DOLBY DIGITAL ON
DTS PCM
DOWN SAMPLING ON
ANALOG 2.0 CH
SACD MULTI-CH
AUDIO
ANALOG
OFF
2.0 CH
ON
5.1 CH
PCM
ON
2.0 CH
MULTI-CH
AUDIO
SACD
OFF
2 CH
ON
MULTI-CH
PCM
CD AREA
ON
2.0 CH
MULTI-CH

Speaker Setting

When 5.1CH is selected for analog out, some speaker settings
will be required.
1
Press the K or L button to select 5.1CH, then
press the ENTER button.
2 Press the K or L button to
select the below items, then
press the ENTER button.
SPEAKER SIZE
• Press the K or L button to select
the speaker to set.
• Press Enter until the desired speaker size appears.
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: LARGE)
LARGE: Select this when the connected speaker is capable
of playing back sounds of 100Hz or less.
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or less.
OFF: Select this when it is not connected. (It cannot be
set OFF on the FRONT speaker.)
SUB WOOFER (Default: ON)
ON: Select this when SUB WOOFER is connected.
OFF: Select this when it is not connected.
NOTES:
• "OFF" is not available for SUB WOOFER when
"SMALL" is selected for FRONT(L/R).
• "SMALL" is not available for FRONT(L/R) when "OFF" is
selected for SUB WOOFER.
• When in playback of DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
• During DVD-Audio playback, the Low Pass Filter (which
filters out the sound with the sound wave frequency
over 100Hz) of the SUB WOOFER will be turned off
with the following speaker setting. Otherwise, the Low
Pass Filter will be turned on.
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE
DELAY TIME
To enjoy 5.1-channel surround sound, the distance between the lis-
tening position and all speakers (excluding the Sub woofers) should
ideally be set at a uniform distance on a circle. If the speakers can-
not be set at this manner, the ideal listening position can be virtually
created with the delay time setting.
Use the K or L button to select the
setting item, then press the ENTER
button.
• Press the K or L button to select
the speaker to set, then press
the ENTER button.
DISTANCE (Default : FEET)
METERS(when the ENTER button is pressed):
The unit of distance is set to meters ("m").
FEET(when the ENTER button is pressed):
The unit of distance is set to feet ("ft").
– 26 –
AUDIO
5.1 CH
SPEAKER SIZE
DELAY TIME
BALANCE
AUDIO
SPEAKER SIZE
FRONT (L/R) LARGE
CENTER LARGE
SUB WOOFER ON
SURROUND (L/R) LARGE
AUDIO
DELAY TIME
DISTANCE FEET
FRONT(L/R) 10ft
CENTER 10ft
SURROUND 10ft
DEFAULT ON
EN