TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, WARNING DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. Read Instructions – All the safety and operating instructions should be read before the product is operated.
INTRODUCTION The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Track 1 CAUTION: ¡Use caution not to pinch your finger in the disc slot. ¡Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player. – 6 – Group 1 Group 2...
User can resume to playback from the part at which the play was stopped even if the power turn off. ¡Component Video Out Jacks Jacks located on the back of the DVD Player which are used to send high-quality video to a TV via Component Video In Jacks.
This indicator lights when the AUDIO EX. button is ON. 31. SUPER AUDIO CD Indicator This indicator lights when playing a Super Audio CD. 32. STANDBY Indicator This indicator lights when the DVD player turns off. – 8 – – 8 –...
FUNCTIONAL OVERVIEW Tour of the remote control Buttons on remote control work in different ways for DVD, VCD, and CD : Refer to the following table for correct use. POWER • Press this to switch the power between on and standby. A-B REPEAT Button •...
Page 10
• Moves the cursor and determines its position. RETURN Button • Returns to a previous menu. SETUP Button • Brings up the DVD player’s Setup menu. SKIP Buttons • To skip Chapters • To skip Tracks (For DVD-Audio). SEARCH Buttons •...
FUNCTIONAL OVERVIEW Display Stays on when repeat title function is on. Stays on when the repeat function is on. Stays on when the A-B repeat function is on. Stays on when the inserted disc is being played back. Displays During Operation Power on No disc inserted Tray open...
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player and set the Progressive switch on the back of the DVD player to “PROGRESSIVE”. Next, set your TV to the progres- sive scan mode.
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT jacks.
HOOK UPS Connection to 5.1-channel Surround Sound system Analog 5.1-channel audio signals can be output from the DVD player. The multichannel audio signals recorded in packed PCM can be played when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.
• If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD player. Refer to page 12. • Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
• A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. • With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.
PLAYING A DISC Step by Step Playback DVD-A Only Moving Picture During playback, press the PAUSE button. • Playback will pause and sound will be muted. The disc advances by one frame each time the PAUSE button is pressed. To exit step by step playback, press the PLAY but- ton.
PLAYING A DISC Track DVD-A There are three ways to begin playback on a DVD-Audio, Audio CD, Super Audio CD, Video CD, MP3 or WMA disc at a specific Track. By using the Numeric buttons (Except for DVD-Audio) Press the numeric buttons to enter the desired Track number.
PLAYING A DISC Repeat The REPEAT button is available only during playback. REPEAT TITLE / CHAPTER To activate the repeat function, press the REPEAT button during playback. • The repeat mode changes as described below every time you press the button. CHAPTER (repeat off) (current chapter repeat) (current title repeat)
This DVD player can reproduce images and sounds from data recorded in MP3, JPEG and WMA formats on CD-R and CD-RW discs. The DVD player can also run JPEG files stored on Kodak picture CD. The user can enjoy picture images on the television set by reproducing picture CDs.
PLAYING A DISC Applicable WMA file Remarks • Those frequencies are Sampling fre- 44.1kHz applicable to WMA version 8 quency 48kHz only, not to WMA version 9. • Ensure that the copyright function is set to off when Bit rate 48–192kbps preparing a WMA disc.
SKIP button H or G. Audio Language or Sound Mode JPEG The DVD player allows you to select a language during DVD disc (if multi language available) RANDOM CD [DATA] playback.
• Stereo sound mode will not be changed when playing DTS CD. Subtitle Language The DVD player allows you to select a language for subtitle during DVD disc (if available) playback. Press the SUBTITLE button during playback. Press the SUBTITLE button repeatedly to select your desired subtitle language.
PLAYING A DISC You can check information about the current disc by pressing the DISPLAY button on the remote control. Press the DISPLAY button during playback to show cur- rent Track. • The elapsed and remaining playing time of the current track will be displayed.
Display Setting You can change certain aspects of the DVD display screens, on-screen messages and the display panel on the front of the DVD player. Press the SETUP button in STOP mode. Press the B button to select CUSTOM, then press the ENTER button.
Audio Setting Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD player. Press the SETUP button in STOP mode. Press the B button to select CUSTOM, then press the ENTER button.
DVD SETUP FRONT(L/R), CENTER, SUR- ROUND(L/R) (Default : 10ft) FRONT(L/R): The distance can be set within the range of 0 to 60 feet. CENTER, SURROUND: These are depends on the setting value of FRONT(L/R). NOTES: • It is not possible to adjust this item if CENTER and SURROUND have been set to OFF in the SPEAKER SIZE setting.
Page 28
DVD SETUP Language Code Language Frisian Abkhazian 4748 Galician Afar 4747 Georgian Afrikaans 4752 German [GER] Albanian 6563 Greek [GRE] Amharic 4759 Greenlandic Arabic 4764 Guarani Armenian 5471 Gujarati Assamese 4765 Hausa Aymara 4771 Hebrew Azerbaijani 4772 Hindi Bashkir 4847 Hungarian [HUN] Basque 5167...
MAINTENANCE Cleaning the Cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.
TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, con- sulting the following checklist. Problem No power No sound or picture Distorted picture Completely distorted picture or black/white picture with DVD...
Page 34
You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. U.S.A Marantz America, Inc. EUROPE Marantz Europe B.V. Printed in China 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, kanagawa 228-8505, Japan 1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
Need help?
Do you have a question about the DV6400 and is the answer not in the manual?
Questions and answers