Command List For The System Manager; Command Details Of The System Manager - AOR ARD9900 Instruction Manual

Command List for the System Manager

Note: 1. The following commands are available under the system management
screen only.
2 After any of the following commands have been changed, the ARD9900power must
be turned off, and then turned back on to reinitialise.
Command
AAK
ACP
ADC
ADS
AFC
AHL
ALF
AMS
APR
ARA
ATT
AUI
AVT
Command details for the System Manager
AAK
Function Set an Air Key code
Default
Format
Parameter
Details Set an Air Key code
Example
Function
Set an Air Key code
Set the transmit channel
Display the current commands
List the current channel settings
Set AFC on/off
Set the duration of the synchronous header signal
Adds the LF command when the [CR] key of the PC is pressed
Change the master code key
Reset the unit to the factory's default setting
Select to monitor digital voice and analogue voice or analogue
only analogue voice
Set the output level of the ARD9900 to the radio
Set user ID
Activate/deactivate the video through function
0000
AAK {0000 – 9999} [CR]
{0000 – 9999}
AAK_1111 [CR]