Operator's Command List; Operator's Command Details - AOR ARD9900 Instruction Manual

Operator's Command List

Command
AAQ
ACD
ACN
ACO
ACS
ADC
ADS
AMA
ATX
AVR

Operator's Command details

AAQ
Function Send VIDEO In signal to the VIDEO OUT (to the monitor screen)
Capture image into memory of the ARD9900
Default
Format
Parameter
Details
Example
ACD
Function Display the last received sender's ID
Default
Format
Parameter
Details
Example
ACN
Function Display the last received net mask
Default
Format
Parameter
Details Display the last received net mask
Example
Function
Send VIDEO In signal to VIDEO OUT (to a monitor screen)
Capture image into memory of the ARD9900
Display the last received sender's ID
Display the last received net mask
Enter the Converse mode
Display the last received sender's ID
List the current commands
Display current settings
Entering to the System Management Screen
Send digital image
Display the current firmware version
None
AAQ {0 / 1} [CR]
1: Send VIDEO In signal to the VIDEO OUT (to the monitor
screen)
0: Capture image into memory of the ARD9900
While AVT command is OFF, [AAQ 0] will be accepted.
Entering AAQ[CR] will respond with the current status.
AAQ ON --- Video signal is passed to the VIDEO OUT port
AAQ OFF --- Video signal is not passed to VIDEO OUT
AAQ_0 [CR]
12356
ACD [CR]
None
Display the last received sender's ID
ACD [CR]
FFF00
ACN [CR]
None
ACN [CR]