Entering The System Management Screen - AOR ARD9900 Instruction Manual

cmd>CCC_NN [CR]
CCC: Command (Must be in upper case)
_ Space
NN: Parameter
[CR]: Carriage Return
Entering a command without a parameter will display the current parameter (value)
setting.
cmd>CCC[CR]
If an invalid parameter or command is entered, the ARD9900 will respond as follows:
cmd>
?
cmd>

Entering the System Management Screen

Using the AMA command with the master key code, you can enter the System Management
Screen. To let you know that you are in the System Manager Screen, the command prompt
changes from lower to upper case:
Note : The master key code consists of 12 digits of numeric code (0 ~ 9).
Warning !
The master key code MUST be kept in a secure place. Without the proper master key code,
no System Manager specific code changes can be made. In addition, it is the number on
which the encryption algorithms base their encryption so as the system manager, you will
need to be aware of the number to arrange communications within your communication group.
If you made an entry error whilst changing the Master Key
Code, correct it before pressing the return key. If you exit
from
incorrect/unknown code neither you nor our factory can
change it.
************
cmd>AMA_
( _ : space key)
CMD>
The factory default is 123456789012]
the master key
Å
[CR] ( Enter the master key code.)
(Response from PC)
code setting screen

with an