Maintenance And Service; Maintenance: Frequency And Tasks; Maintenance Tasks - Homeowner - Quadra-Fire TOPAZ-MBK-IPI Owner's Manual

4

Maintenance and Service

Any safety screen or guard removed for servicing must be
replaced prior to operating the stove.
When properly maintained, your stove will give you many
years of trouble-free service. Contact your dealer to answer
questions regarding proper operation, troubleshooting and
service for your appliance. Visit www.heatnglo.com to locate
a dealer. We recommend annual service by a qualified
service technician.
A. Maintenance: Frequency and Tasks
Task Frequency
Glass Cleaning Seasonally
Remote Control Seasonally
Venting Seasonally
Gasket Seal Annually
and Glass
Inspection
Log Inspection Annually
Firebox Annually
Inspection
Control Annually
Compartment &
firebox Top
Burner Ignition Annually
& Operation
B. Maintenance Tasks - Homeowner
Installation and repair should be done by a qualified service
technician only. The stove should be inspected before use and
at least annually by a professional service person.
The following tasks may be performed annually by the
homeowner. If you are uncomfortable performing any
of the listed tasks, please call your dealer for a service
appointment.
More frequent cleaning may be required due to lint from
carpeting or other factors. Control compartment, burner and
circulating air passageway of the stove must be kept clean.
CAUTION! Risk of Burns! The stove should be turned off
and cooled before servicing.
Glass Cleaning
Frequency: Seasonally
By: Homeowner
Tools Needed: Protective gloves, glass cleaner, drop cloth
and a stable work surface.
CAUTION! Handle fixed glass assembly with care.
13 Quadra-Fire • TOPAZ-MBK-IPI, TOPAZD-PMH-IPI, TOPAZD-MBK-IPI, TOPAZD-CSB-IPI Owner's Manual • 2341-981_R4 • 10/15
To be completed by
Homeowner
Qualified Service
Technician
GLASS IS BREAKABLE.
• Avoid striking, scratching or slamming glass.
• Avoid abrasive cleaners.
• DO NOT clean glass while it is hot.
• Prepare a work area large enough to accommodate fixed
glass assembly and door frame by placing a drop cloth on
a flat, stable surface.
Note: Fixed glass assembly and gasketing may have
residue that can stain carpeting or floor surfaces.
• Remove safety barrier
• Remove front casting by loosening thumb screw at bottom
of casting. Slide bottom of casting away from appliance.
CAUTION! Risk of Injury! Casting is very heavy. Handle
with care.
See Figure 4.1. Set front casting aside on prepared work
surface.
• Remove glass from appliance. Figure 4.2.
• Using a #2 Phillips bit, remove three fasteners from the top
of the glass frame assembly.
TOP CASTING
Figure 4.1 Remove Casting
PHILLIPS SCREWS
Figure 4.2 Remove Glass Frame
FRONT CASTING
SAFETY BARRIER