Table of Contents
Advertisement
ON / OFF button
Recommendation for self-service: via PIN.
If "via PIN" is set, then the PIN for the cleaning level will
be queried before switching on or off.
Menu pad
Recommendation for self-service: delayed.
If "delayed" is set, the menu will only be shown if the
display is pressed twice.
Illumination
™ Keep touching the pad
color appears
The next color is chosen every time you touch it.
See below for the sequence of the illumination colors.
The starting position is always the set color.
• Positions 1 – 16: preset colors
•
Position 17:
•
Position 18:
•
Position 19:
Display inversely
The standard setting for the WMF prestolino! is inverse.
The display shows black on white.
When inverse is set to "no", the display shows white on
black.
Intro
The start-up program is started here again.
3.3.5
Enter PIN
Individual authorisation levels can be protected using
a PIN. For access to a PIN-protected level, the PIN must be
entered via
pad.
™ Touch
in the main menu
Numerical keyboard display appears.
Enter required 4-figure PIN
™
Confirm with
™
Following entry of a valid PIN, the assigned functions are
available.
User Manual WMF prestolino!
until the desired
illumination
light sequence (sequence of colors)
freeze actual color
LED illumination "off"
Software
w PIN rights access control
Page 34
w Access main menu
Page 20
illumination
After the last position, the loop
starts again at position 1.
display inverse
introduction
2 3 . 0 4 . 2 0 0 8
P I N:
PIN-entry display
33
Hide quick links:
Advertisement
Table of Contents
