Connection To 5.1-Channel Surround Sound System - Marantz SUPER AUDIO CD/DVD PLAYER DV6600 User Manual

CONNECTIONS

Connection to 5.1-channel Surround Sound System

Analog 5.1-channel audio signals can be output from the DVD player.
The multichannel audio signals recorded in packed PCM can be played back when an AV amplifier equipped
with analog 5.1-channel audio inputs is connected.
Front speaker
NOTES:
• For 5.1-channel connections, set "ANALOG AUDIO" to "5.1CH" in the setup mode and adjust "SPEAKER SIZE", "DELAY
TIME" and "BALANCE" settings (refer to pages 29-30).
• You can enjoy high-quality analog sound by cutting off analog video signals. Press the AUDIO EX. button on the front panel.
• When using the HDMI connection, signals from the 5.1CH AUDIO OUT jacks can be limited in some cases. If it occurs, set
"HDMI AUDIO" to "OFF" to output the signals (refer to pages 28-29).
"DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc.
Center speaker
(left)
Surround
speaker
(left)
AUDIO
DVD
AV amplifier
with
5.1-channel
input jacks
To 5.1CH
Audio Input
Jacks
Audio Cable
(commercially
available)
5.1CH AUDIO OUT
5.1CH
AUDIO
OUT
– 14 –
Front speaker
(right)
Subwoofer
Surround
speaker
(right)
EN