Ihren wertvollen Einkauf Das Aufbewahren der place to be referred to as necessary for insurance Quittung ist wichtig, da die darin enthaltenen purposes or when corresponding with Marantz. Angaben für Versicherungswecke oder bei Korrespondenz mit Marantz angeführt werden IMPORTANT müssen.
INTRODUCTION grasp the plug. It is advisable when leaving the house for an extended Thank you for selecting the Marantz SA8400 Super period, or during a thunderstorm, to disconnect the Audio CD Player for your A / V system. equipment from the mains supply.
(remote sensor) on the front of the insert new batteries. Super Audio CD player. • When batteries which are no longer required Remote control operation may not be possible if the are to be discarded, follow the directions remote control unit’s transmitter is not pointing in the...
NAMES AND FUNC- TIONS FRONT PANEL POWER ON/OFF z POWER ON/OFF switch This switch is used to turn the power ON and OFF. This button is used to change the player’s display When it is pressed, the display window lights up, and from “text information”...
SOUND MODE REMOTE CONTROLLER TIME TEXT ⁄2 OPEN/CLOSE DISPLAY SOUND MODE ⁄3 REPEAT ⁄4 ⁄5 OPEN/CLOSE RANDOM ⁄6 DISPLAY OFF PROGRAM CANCEL The buttons listed above are the same to the buttons on the front panel of the main unit. Please see the correspond items in “Front Panel”...
A STEREO AUDIO OUT (analog output) E REMOTE CONTROL IN, OUT (input and connectors When the remote control connectors on the player and on a Marantz AV component are connected using B FILTER STANDARD/CUSTOM the accessory remote control connecting cables, the (Filter standard/custom switch) components can be operated as a system by remote control.
DISPLAY RNDM TRK A – B PROG TOTAL 9 10 11 12 13 14 15 16 17 18 19 20 a Main display , ALL, 1 (repeat) indicator The time display and text information of the disc to This lights during repeat play. be played as well as the setting menus and other displays appear on the main display.
CONNECTIONS Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection please refer to instruction manuals of stereo system to be connected. Caution: Do not connect output from this unit to PHONO input of your audio system. 1.
NORMAL PLAYBACK * For Super Audio CD/CD hybrid-layer discs (See SUPER AUDIO CD PLAYER PLAYBACK page 2), the layer that is set in the start sound mode (See page 10) is played. To change the...
SKIPPING TO THE PREVIOUS OR NEXT TRACK START SOUND MODE (TRACK SKIP) When a Super Audio CD hybrid layer discs that has To listen to a track posterior to the current track both a Super Audio CD high sound quality stereo Press area and a CD area information are to be played, button on the remote the number of times you want...
To Check the Programmed Tracks Q&A Press the SCROLL/RECALL button on the remote control during the program or when the program is • How many tracks can be programmed? stopped (“PROG” lights up). Every time press SCROLL/RECALL button, the Up to 30 tracks can be programmed for program play.
DARD connection problem. If the problem cannot be corrected even after carrying out the following checks, consult your dealer or nearest Marantz sales office or service counter. AC IN AUDIO OUT...
SPECIFICATIONS Super Audio CD Audio Characteristics Analog output Channels 2channels (Max.) Frequency range 2Hz — 100kHz Frequency characteristics 2Hz — 50kHz (-3dB) Dynamic range 114dB THD (1kHz) 0.0009% wow & flutter Precision of quartz Output level 2.2V Digital output output level (cinch JACK) —...
Page 16
You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V.
Need help?
Do you have a question about the SA8400 and is the answer not in the manual?
Questions and answers