Adding A Host Steps - Inspur AS1100H User Manual

Hosts connecting storage arrays have different operating systems, so it is required to create
storage partitions for each operating system, refer to Figure 19-4.

19.5 Adding a host steps

1. Select setup page in enterprise management window (EMW), click manage a storage array.
2. In the interface displayed, select a storage array to configure, click ok, an array
management window AMW appears.
3. In AMW window, select setup page, click manually define hosts.
4. Refer to interface instructions and online help, define a host and correlate to HBA host
ports, and define a host group if necessary.
Figure 19-4