Chapter XIII Name the Storage Array
13.1 Naming notes
1. Disk array name in storage array software could be composed of letters, digits and special
characters "_", "-" or "#", except these, no other special characters are allowed.
2. When naming a storage array, prefix "Storage Array" will be added before the name
automatically.
3. When a storage array is first detected automatically or added manually, the default name of
this storage array is "unnamed".
13.2 Naming steps
1. Select an unnamed storage array and click locate, confirm its physical location via
positioning indicator;
2. Select Setup interface in enterprise management window, click name/rename storage
arrays.
3. Repeat the above steps for each unnamed storage array.