Part Repair Indicator - Inspur AS1100H User Manual

Box
symbol/diagnosis
display
Ethernet
Diagnosis code and description
L0
L1
L2
L3
L4
L5
L6
L7
L8
L9
LB
LC
LD
LE
LF
LH

8.3 Part repair indicator

There's a green permitting part repair indicator in each power fan module, controller module
and internal battery interconnection module, which instructs operators to dismantle parts in a safe
way (dismantling parts before part repair indicator is on may cause data loss).
Part repair indicator may light up or off automatically with situation change, under most
circumstances, permitting repair indicator only lights up when a certain part fails and fault
indicator is on, if fault indicator is on but permitting repair indicator is off, it may need to repair
other parts first, please check storage management software to decide measures to be adopted.
Controller
Controller
Not matched controller type
Internal battery interconnection module lost
Permanent memory error
Permanent hardware error
Permanent data protection error
Automatic code synchronization (ACS) failure
Not supported host interface cards
Subtype symbol not set or not matched
Memory setting error
Connection speed not matched
Host card configuration error
Memory setting error
Memory mixed DIMM
Memory issue
Limited SYMbol lock
Controller firmware not matched
Displays box symbol or diagnosis
code
Left indicator symbols connection
rate
Right indicator symbols connection
status
Left indicator on - 1000MB/s
Left indicator off - 100MB/s or
10MB/s
Right indicator on - Connection
established
Right indicator off - No connection
is established
Flash activity