Install The Equipment Into Cabinet - Inspur AS1100H User Manual

Round head screw
7. Fasten four fixing screws between front and rear rails.
8. Install guide rail on the other side of the cabinet, according to the above steps, be
noted that guide rails on both sides shall be leveled, that is on the same height.

4.4 Install the equipment into cabinet

Note:

For storage equipment is heavy, in order to guarantee safety, when installing storage
equipment into the cabinet, at least 4 persons are needed to move the storage system.
1. Lift the storage equipment, make it close to guide rail, and align lower angles on both
sides in front of the storage system, with angles of L-shaped rails on left and right sides.
2. To keep the storage system leveled, place the front of storage system on L-shaped guide
rail (now persons in the front shall support it to guarantee safety), push it into the
cabinet steadily, after entering about 1/3, the number of persons could be reduced to two,
finally, push the equipment into the cabinet completely, as shown in Figure 4-4.
Fixing column
Figure 4-3