Timer Programs - Marantz CR401 User Manual

Marantz cd receiver user guide cr401
Hide thumbs Also See for CR401:
Table of Contents

Advertisement

OTHER OPERATION

TIMER PROGRAMS

7 About the Timer Programs
• This unit has three timer programs so that you
can turn it on and off automatically at certain
times and on certain days of the week.
• Timer programs can be set for single operation
(Once) or everyweek operation (Everyweek) or
everyday operation (Everyday) or the days of
the week operation (Weekday).
7 Timer Program Examples
• The following examples highlight some of the
ways in which you can use the timer programs.
Timer program 1: To wake up to your favorite
radio station every morning, set as follows:
TIMER PROGRAM 1 SET → FM/AM → A1 FM
87.50MHz → EVERYDAY → ON TIME=
7:00AM → OFF TIME= 7:30AM
(If you want a radio alarm only on weekdays,
select "WEEKDAY" instead of "EVERYDAY"
and specify "MON-FRI".)
Timer program 2: To listen a radio program on
only this Sunday, set as follows:
TIMER PROGRAM 2 SET → FM/AM → B1
AM522kHz → ONCE → SUNDAY → ON
TIME= 9:00PM → OFF TIME=10:00PM
7 Timer Program Overlap
• If two or three timer programs are set to the
same ON TIME, the timer program with the
lowest number has priority.
For example, if Timer program 1 and Timer
program 2 are both set to an ON TIME of
7:00AM, Timer program 1 has priority and Timer
program 2 is ignored.
Timer program 1: 7:00AM - 1:00PM
(This timer has priority)
Timer program 2: 7:00AM - 0:30PM
If the setting of the two timer program overlaps,
the earlier timer has priority.
Timer program 1: 9:00AM - 10:00AM
Timer program 2: 8:00AM - 10:00AM
(This Timer program has priority)
20
7 Timer Program Setting
• You must set the clock time before you set the
timer programs.
• You need to store preset stations before you set
the timer programs.
1.
Press the TIMER button x, "TIMER
PROGRAM 1" is displayed.
2.
The display changes as follows each time the
Easy JOG 4/¢ knob !5 is turned or the 5
or ∞ button c is pressed.
TIMER PROGRAM 1
TIMER PROGRAM 2
TIMER PROGRAM 3
Press the Easy JOG 4 /¢ knob !5 or
3.
ENTER button b to select timer program
number.
4.
The display indicate "TIMER PROGRAM x
SET".
Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or ∞ button c, the display changes
as follows.
TIMER PROGRAM x SET
TIMER PROGRAM x CONFIRM
TIMER PROGRAM x OFF
TIMER PROGRAM x ON
• If timer program is already available, to select
"TIMER PROGRAM x CONFIRM" to scroll the
timer setting contents.
• If timer program is already available, to select
"TIMER PROGRAM x ON" to activate the
timer.
• To select "TIMER PROGRAM x OFF" to turn
off the timer program.
Press the Easy JOG 4 /¢ knob !5 or
5.
ENTER button b to select "TIMER PROGRAM
x SET".
6.
The display indicate "TIMER PROGRAM x
FM/AM". Either turn the Easy JOG 4/¢
knob !5 or press the 5 or ∞ button c, the
display changes "TIMER PROGRAM x FM/AM".
Press the Easy JOG 4 /¢ knob !5 or
7.
ENTER button b to select "CD", "FM/AM",
"TAPE", "MD" or "DVD".
Either turn the Easy JOG 4/¢ knob !5 or
8.
press the 5 or ∞ button c to select Preset
station to be programed.
9.
Select the Operation method.
q Either turn the Easy JOG 4/¢ knob !5
or press the 5 or ∞ button c to select
operation method "ONCE", "EVERYWEEK",
"EVERYDAY" or "WEEKDAY" .
w Press the Easy JOG 4/¢ knob !5 or
ENTER button b to decide the operation.
When you select "ONCE" or "EVERYWEEK",
you can select the day of the week by turning
the Easy JOG 4/¢ knob !5 or pressing
the 5 or ∞ button c.
When you select "WEEKDAY", use the
Easy JOG 4/¢ knob !5 or pressing
the 5 or ∞ button c to select the first day,
and then press the Easy JOG 4/¢
knob !5 or ENTER button b.
Use the Easy JOG 4/¢ knob !5 or
pressing the 5 or ∞ button c to select the
last day.
Then press the Easy JOG 4/¢ knob
!5 or ENTER button b.
10.
Set the On time.
q Either turn the Easy JOG 4/¢ knob !5
or press the 5 or ∞ button c to adjust the
hour for the On time and press the Easy
JOG 4/¢ knob !5 or ENTER button
b.
w Either turn the Easy JOG 4/¢ knob !5
or press the 5 or ∞ button c to adjust the
minutes for the On time and press the
Easy JOG 4/¢ knob !5 or ENTER
button b.
11.
Set the Off time.
q Either turn the Easy JOG 4/¢ knob !5
or press the 5 or ∞ button c to adjust the
hour for the Off time and press the Easy
JOG 4/¢ knob !5 or ENTER button
b.
w Either turn the Easy JOG 4/¢ knob !5
or press the 5 or ∞ button c to adjust the
minutes for the Off time.
12.
Set the timer program.
q Press the Easy JOG 4/¢ knob !5 or
ENTER button b to decide the timer
program setting.
Standby indicator lights up green and
setting contents are scrolled.
Notes
• Timer program can activate regardless of power
on or standby mode.
• When timer program is finished, the unit goes to
standby mode.
• When timer program is activated, standby
indicator lights green.
• You can cancel the Timer program setting
procedure at any time by pressing the TIMER
button x.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents