Cd Operation; Playing Cd - Marantz CR401 User Manual

CD OPERATION

PLAYING CD

1. Press the POWER ON/STANDBY switch q or
button z to turn on the power.
Press the OPEN/CLOSE 0 button r to open
2.
the disc tray, put the CD on the tray with the
label-side facing up, and press
OPEN/CLOSE 0 button r again to close the
tray.
• Be sure to put 8 cm discs in the center of the
tray.
Label side
Press the PLAY/PAUSE 6 button !4 or
3.
PLAY 2 button ¤5 to start playback.
• Playback starts and the "2" indicator appears
on the display.
Note
If you press the OPEN/CLOSE 0 button r or
PAUSE 8 button ¤4 in except CD mode, the
sound source is changed to CD mode
automatically.
7 To Stop Playback
• Press the STOP 7 button !2 or ⁄0 .
7 To Pause Playback
• Press the PLAY/PAUSE 6 button !4 or
PAUSE 8 button ¤4 . "8" indicator appears on
the display.
• To resume playback, press the PLAY/PAUSE
6 button !4 or PLAY 2 button ¤5 .
7 To Fast Forward or Fast Reverse
(remote controller only)
• During playback or while playback is paused,
press and hold the ¡ button ⁄2 to fast forward,
or the 1 button ⁄1 to fast reverse.
12
• For MP3, fast reverse only works within the MP3
track that is currently playing.
• If you press the button for more than four
seconds, the fast forward or fast reverse speed
increases.
7 To Select Tracks
the
On the CR401:
• Turn the Easy JOG 4/¢ knob !5 to select a
track for playback.
• If you select a track while playback is stopped,
press the Easy JOG 4/¢ knob !5 to start
playback.
• Press the Easy JOG 4/¢ knob !5 to jump to
the next track during playback.
On the remote controller:
• Press the ¢ button ¤3 to select the next track,
or the 4 button ¤2 to select the previous track.
• If you press the 4 button ¤2 during playback or
while play-back is paused, the beginning of the
current track is selected.
• If you select a track while playback is stopped,
press the PLAY 2 button ¤5 to start playback.
Note
With CDs and MP3 discs that contain many
tracks, playback may take a while to start.
7 Selecting Tracks by Number
Use the number buttons to select specific tracks.
1.
Use the number buttons to enter a track
number. Playback starts automatically.
• For MP3 disc, select the serial number assigned
to the track.
• To enter a track number smaller than or equal to
10, press each Numeric button ‹0 .
For example, to enter track number 10, press
10/0.
Use the --/--- button v to enter track numbers
above 10.
• To enter a track number from 11 to 99, press --
/--- button v once.
For example, to enter track number 15, press --
/--- button v , 1 and 5.
• To enter a track number greater than or equal to
100, press --/--- button v twice.
For example, to enter tranck number 123, press
--/--- button v twice, 1, 2 and 3.
7 Repeat Playback
Use the Repeat function to play a track, a folder for
MP3 only or a disc repeatedly.
1. During playback, press the REPEAT button ¤6
repeatedly to select repeat mode.
D-Rpt: Repeat the disc
F-Rpt: Repeat current folder (MP3 only)
T-Rpt: Repeat current track
2.
To cancel Repeat playback, press the REPEAT
button ¤6 repeatedly to turn off the "Rpt"
indicator.
Notes
• If you press the REPEAT button ¤6 during
memory playback, your custom program will play
"D-Rpt" and "T-Rpt" only.
• If you press the REPEAT button ¤6 during
random playback for CD, you will use random
playback repeatedly.
!5 !4 !2
CD RECEIVER CR401 CD RECEIVER CR401
INPUT INPUT MENU MENU DIRECT DIRECT
BASS BASS TREBLE TREBLE
PUSH TO ENTER PUSH TO ENTER VOLUME VOLUME
r
STANDBY STANDBY
POWER ON / STANDBY POWER ON / STANDBY PHONES PHONES
q
CLOCK
CALL
z
TIMER
1 2
3
4 5
‹0
6
7 8
9
v
--/---
CLEAR
ENTER
10/0
MENU DISPLAY
VOL
INPUT MUTE INPUT
MODE REPEAT
¤6
VOL
¤5
¤4
⁄0
⁄1 ¤3
TUNING PRESET
⁄2 ¤2
DIMM DAB FM AM
AUTO TUNE SLEEP SHIFT DIRECT
MEMO
REMOTE CONTROLLER REMOTE CONTROLLER REMOTE CONTROLLER
RC601CR RC601CR RC601CR