CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read these instructions. 2. Keep these instructions. 3.
Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. CC4001 can be powered by 120V AC only. COPYRIGHT Recording and playback of any material may require consent. For further information refer to the following: —Copyright Act 1956...
INTRODUCTION PRODUCT FEATURES APPLICABLE DISCS TO THE UNIT • MP3 File and CD-R/RW Play Compatible This unit can play back music CD format and Audio CD (CDDA) CD-R/RW discs containing MP3 music data. For restrictions about MP3 files, please refer to “PLAYING MP3 FILES”.
Cautions on handling power cord USING REMOTE CONTROL UNIT • Do not touch the power cord with wet hands. Cautions on handling batteries • When disconnecting the power cord, always Misuse of the batteries can result in electrolyte make sure that you take hold of the plug. leakage, rupturing, corrosion, etc.
8 PAUSE button This screen shows the operating status. Press this button to pause playback. If pressed again, the unit returns to playback. ⁄3 ⁄4 v 5 DISC CD CHANGER CC4001 MP3 CD PROGRAM RANDOM REPEAT 1DISC DISC SKIP TRACK...
NAMES AND FUNCTIONS DISPLAY WINDOW MP3 CD PROGRAM DISC a 3 (Play) indicator h REMAIN indicator This lights during disc play. This lights while displaying track and disc remaining times. b 8 (Pause) indicator i 1-20 (track number display) This lights when play is paused. Displays the number of tracks recorded in a c MP3 indicator disc, the number of remaining tracks, and the...
INT. side. When the remote control connectors on the When it is used connected to external unit and on a Marantz AV component are component by a remote connecting cable and connected using the accessory remote...
NAMES AND FUNCTIONS REMOTE CONTROLLER z ON button When this button is pressed while the unit is in standby status, the power of the unit is turned STANDBY x STANDBY button ⁄7 OPEN/CLOSE TIME DIMMER When this button is pressed while the power is ⁄6 on, the unit goes into the standby status.
DISC 5 REMOTE CONTROLLER RC4001CC • To synchronize the remote control code of the CC4001 with the remote control unit, press the PROGRAM and RECALL buttons on the remote control unit together. • The remote control code set is displayed on the display window for two seconds, and the setting is completed.
PHONO PHONO RECORDER RECORDER COPY COPY RECORDER2 RECORDER2 Left speaker AC IN MODEL NO. CC4001 MODEL NO. CC4001 w (Optional) e (Optional) Connect to digital input VOLUME VOLUME terminals of AV amplifier, D/A converter or CD recorder, etc.. BALANCE BALANCE...
POWER ON/STANDBY Press OPEN/CLOSE button on the unit or remote control unit to open the disc tray. Hold the edge of the disc and place on the tray. 5 DISC CD CHANGER CC4001 STANDBY STANDBY POWER ON/STANDBY OPEN/CLOSE TIME DIMMER 1.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 REMOTE CONTROLLER RC4001CC 8 PAUSE OPEN/CLOSE PLAY STOP PAUSE 5 DISC CD CHANGER CC4001 MP3 CD PROGRAM RANDOM REPEAT 1DISC DISC SKIP TRACK REPEAT RANDOM DISC TOTAL EACH REMAIN LEVEL...
RANDOM REPEAT DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 REMOTE CONTROLLER RC4001CC OPEN/CLOSE PLAY STOP PAUSE 5 DISC CD CHANGER CC4001 MP3 CD PROGRAM RANDOM REPEAT 1DISC DISC SKIP TRACK REPEAT RANDOM DISC TOTAL EACH REMAIN LEVEL...
STANDBY OPEN/CLOSE PROGRAM RANDOM DISC 1 REMOTE CONTROLLER 5 DISC CD CHANGER CC4001 DISC SKIP STANDBY POWER ON/STANDBY • Every time RANDOM button is pressed the Random mode changes as follows: One Disc Random...
• At this time, “REPEAT 1 DISC” lights up. REMOTE CONTROLLER RC4001CC REPEAT DISC OPEN/CLOSE PLAY STOP PAUSE 5 DISC CD CHANGER CC4001 MP3 CD PROGRAM RANDOM REPEAT 1DISC DISC SKIP TRACK REPEAT RANDOM DISC TOTAL EACH...
• Each time RECALL button is pressed the programmed tracks are displayed one by one. DISC1-5 PLAY OPEN/CLOSE PLAY STOP PAUSE 5 DISC CD CHANGER CC4001 MP3 CD PROGRAM RANDOM REPEAT 1DISC DISC SKIP TRACK REPEAT RANDOM DISC TOTAL...
DISPLAY WINDOW BRIGHTNESS SWITCHING PLAYING TIME ADJUSTMENT DISPLAY STANDBY OPEN/CLOSE TIME DIMMER DIMMER PROGRAM RECALL RANDOM REPEAT DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 REMOTE CONTROLLER RC4001CC Each time DIMMER button on the remote control Each time TIME button on the remote control unit unit is pressed, the display window brightness is pressed, the display of the playing time changes changes as follows:...
1. Is the disc dirty? dealer or nearest Marantz sales office or service 2. Is the disc scratched? counter. 3. Is the disc warped? # The disc fails to rotate.
Specifications subject to change without prior notice. Dimensions 2channels 20Hz — 20kHz 100 dB or more 0.0020% 110 dB or more 0.5Vp-p (75Ω) -19dBm 780nm 44.1kHz 5 DISC CD CHANGER CC4001 DISC SKIP STANDBY POWER ON/STANDBY 17-5/16 (440) 16 (404) OPEN/CLOSE PLAY STOP...
Page 24
You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 05/2006 00M08CW851250 mzh-d...
Need help?
Do you have a question about the CC4001 and is the answer not in the manual?
Questions and answers