Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Prestige Manuals
  4. Car Alarm
  5. APS-20B
  6. Owner's manual

Prestige APS-20B Owner's Manual

3 button vehicle alarm system with channel 3 auxiliary output
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Model APS-20B
Owner's Manual
3 Button Vehicle Alarm System
With Channel 3 Auxiliary Output
FEATURES:
2 Three Button RF Transmitters
Three Channel Code Learning Receiver
Remote Panic In All Modes
Built-In Parking Light Output
LED Status Indicator
Multi-Tone Siren
True Last Door Arming
Channel 3 Auxiliary Output
OPTIONS:
Remote Trunk Release
Remote Power Window Control
Remote Garage Door Interface
Remote Engine Starter
Single or Dual Stage Shock Sensor
Starter Interrupt
Keyless Entry
Ignition Control Door-Locks
Page 1

Advertisement

loading

Related Manuals for Prestige APS-20B

Summary of Contents for Prestige APS-20B

  • Page 1 Model APS-20B Owner's Manual 3 Button Vehicle Alarm System With Channel 3 Auxiliary Output FEATURES: 2 Three Button RF Transmitters Three Channel Code Learning Receiver Remote Panic In All Modes Built-In Parking Light Output LED Status Indicator Multi-Tone Siren True Last Door Arming...

  • Page 2: Arming The System - Active

    Your APS-20B Vehicle Alarm System has many features and available options some of which must be selected at time of installation. For your reference, the list on the back page of this manual shows what features and options have been installed with this particular system.

  • Page 3: Disarming The System

    detector to trigger the alarm when armed. If the optional 2-stage shock sensor is installed, any lesser impact will cause the pre-detect stage of the shock sensor to emit a series of short warning tones from the siren when armed. If the optional starter interrupt is installed the vehicle starter circuit is disabled, even with the ignition key the vehicle will not start.

  • Page 4: Eliminating The Arm/Disarm Chirps

    To return to the normal, (alarm mode), operation, move the valet switch to the "off" position any time the ignition switch is in the on position. Note: In the event that you lose your keychain transmitter or the transmitter fails to operate the alarm system, the valet switch can be used to disarm the alarm.
  • Page 5 This will cause the lights to flash, the siren to sound. The panic mode will continue for 30 seconds and then reset. To disengage the panic feature before the 30 seconds are up, press and hold the lock or unlock button of your keychain transmitter for 3 seconds. While the panic mode is engaged, the doors can be remotely locked and unlocked via the transmitter by pressing the lock or unlock button momentarily.

  • Page 6: System Functions At A Glance

    SYSTEM FUNCTIONS AT A GLANCE ALARM LED INDICATORS: RAPID FLASHING SLOW FLASHING ON SOLID 2 FLASH...PAUSE 3 FLASH...PAUSE SIREN CHIRP INDICATION: 1 CHIRP 2 CHIRPS 3 CHIRPS 4 CHIRPS CONTINUOUS ALARM PARKING LAMP INDICATIONS: 1 FLASH 2 FLASHES 3 FLASHES CONTINUOUS FLASH SELECTABLE FEATURES: ¨...