Advertisement
LOCK RING
3
Tighten lock
ring when wheel
is centered on
resistance unit and
bike is firmly locked
in at the skewer
RECOMMENDED SKEWER AND CONE COMBINATION*
*FOR YOUR SAFETY
We recommend using the skewer that was included with your trainer.
4
Turn adjustment
knob until roller
touches tire. then
add 2 to 5 more
turns.
KINETIC SKEWER
(included with trainer)
PART N
www.kurtkinetic.com | 1.877.226.7824
PART M
MOUNTING BIKE
test tire friction
by sharply
moving tire a
1/4 turn back
and forth.
apply another
1/2 turn on
adjustment
knob if needed.
BIKE REMOVAL
To properly remove the bike:
1. Turn the adjustment knob
on the resistance unit
counterclockwise to back
the roller away from the tire
until it is no longer touches.
2. Firmly grasp your bike seat
to stabilize the bike.
3. Open the quick release lever
to its fully open position.
4. Lift bike off trainer.
Page 9
Advertisement
