Panasonic CS-MKS9NB4U Technical & Service Manual page 23

6-1-4. Remove the indoor air temperature sensor.
(1) Disconnect the connector CN08 (ROOM 2P) in the control box and remove the indoor air temperature
sensor. (Fig. 10)
6-1-5. Remove the power box and control box.
(1) Remove a screw and remove the terminal cover. (Fig. 11)
(2) Remove the 2 screws and remove the power box cover. (Fig. 11)
(3) Disconnect the power lines (No. 1 and No. 2) / signal line (No. 3) and ground cable from the terminals in
the power box. (Fig. 12)
Terminal cover
Power box cover
Screw
Screw
Ground cable
Indoor air temperature sensor
Fig.10
Fig.11
Power lines / Signal line
Fig.12
23
CN08
Terminal