3 ] Simulations; List Of Simulations; Contents Of Simulations - Sharp AR-121E Service Manual

AR-151E
[3] SIMULATIONS

1. List of simulations

The table below shows the simulations which are not provided for the AR-120E/150E but newly added to the AR-121E/151E.
Simulation 26-38 of the SR-120E/150E is deleted in the AR-121E/151E.
Main code
24 Special counter clear
26 Various setup
46 Exposure adjustment

2. Contents of simulations

Main code Sub code
24 06 Developer counter clear
When the PRINT switch is pressed, the developer count value is reset to 0.
26 37 Cancel of stop at developer life over
When this simulation is executed, the current set code is displayed. Enter a new code and press the PRINT
switch, and the entered code is registered.
55 CRUM destination display
When this simulation is executed, the current setup of the CRUM destination stored in the machine is displayed.
γ table setup
46 19
When this simulation is executed, the currently set gamma table code number is displayed. Enter the code
number corresponding to your desired gamma table and press the PRINT switch, and the setup will be changed.
Sub code
06 Developer counter clear
37 Cancel of stop at developer over
55 CRUM destination display
γ Table adjustment (Copy mode)
19
Code number
0 Stop at developer life over
1 Stop cancel at developer life over
Code number
00
01
02
03
Code number
1
2
Contents
Content
Setting
Setting
No setup
BTA-A
BTA-B
BTA-C
γ table
Japan
EX Japan
3 – 1