Specifications - Manley Langevin Dual Vocal Combo Owner's Manual

Frequency Response
THD & Noise
Signal to Noise ratio
Headroom
Maximum Output
Maximum Input (with Input at max)
Maximum Gain (factory set for 45 dB)
Maximum Limitting
Attack Time (fixed)
Release Time (fixed)
Input Impedance
Output Impedance
XLR Pin-Out (balanced)
(not appropriate for driving unbalanced inputs)PIN 2 = HOT (+)
1/4" Phone Jack Pin-Out (unbalanced)
(We suggest mono plugs but if a stereo plug must be used the Ring needs to be connected
Power Consumption
Size
Shipping Weight

SPECIFICATIONS

20 Hz to 20 KHz (+/- 1 dB) Mic Pre
20 Hz to 50 KHz (+/- .5 dB) Limiter
.075%
.06%
107 dB
26 dB (ref +4 dBv)
+30 dBv (75 volts p to p)
70 mV mic,
38 dB to 53 dB (internal trimmer) Mic
25 dB Direct Instrument 1/4" input
(knob set to 45 dB)(off to +40 dB range)
15 dB
20 dB
20 mS
500 mS
2400 Ohm, transformer coupled
(optimised for mics with 100 to 600 ohm output impedances)
150,000 Ohm @ 1/4" direct input
11 Ohms (balanced)
6 Ohms (unbalanced)
PIN 1 = Ground or Shield
PIN 3 = LOW (-)
Sleeve = Ground or Shield
Tip = Signal
to the Sleeve)
20 watts
19" X 3.5" X 10" (1U)
20 lbs
12
(1Khz @ +4 dBm) Mic Pre
(1Khz @ +4 dBm) Limiter
Limiter
Limiter
Limiter
800mV direct
Limiter
11 dB w +4 sine