Advertisement

Quick Links

INSTRUCTION MANUAL
RC1200
710W
COMPAC T
RECIPROC AT ING SAW
W I T H MULT I P OSI T ION
ROTAT ING H A NDL E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RC1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for 909 RC1200

  • Page 1 INSTRUCTION MANUAL RC1200 710W COMPAC T RECIPROC AT ING SAW W I T H MULT I P OSI T ION ROTAT ING H A NDL E...
  • Page 2: Table Of Contents

    CONTENTS Warranty Power Tools Warranty For full details please visit us at www.909.com Introduction Environmental protection Description of symbols Specifications General safety rules Additional safety rules for reciprocating saws Accessories Unpacking Know your product Setting up Installing a saw blade...
  • Page 3: Environmental Protection

    Manual before using your new 909 Power Tool. Take For safe operation read instruction manual. special care to heed the Cautions and Warnings. Your 909 power tool has many features that will make Conforms to relevant standards your job faster and easier. Safety, performance, and for electromagnetic compatibility.
  • Page 4: General Safety Rules

    General safety rules f) To reduce the risk of electric shock, the manufacturer recommends the use of a residual current device WARNING. Read all safety warnings and all instructions. with a rated residual current of 30mA or less at Failure to follow the warnings and instructions may result in all times.
  • Page 5: Additional Safety Rules For Reciprocating Saws

    4) Power tool use and care i) Children should be supervised to ensure that they do not play with the appliance. a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will 5) Service do the job better and safer at the rate for which it was a) Have your power tool serviced by a qualified repair...
  • Page 6: Accessories

    Always use supplementary dust Due to modern mass production techniques, it is unlikely extraction where possible. that your 909 Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the •...
  • Page 7: Know Your Product

    Know your product Before using the Reciprocating Saw, familiarise yourself with all the operating features and safety requirements. Use the tool only for the applications intended. All other applications are expressly ruled out 1. Trigger switch 7. Speed control dial 2.
  • Page 8: Setting Up

    Setting up Switching on and off Installing a saw blade 1. Connect the plug to the mains supply. CAUTION. Always ensure that the saw is switched off 2. To start the saw squeeze the and unplugged from the mains supply before installing trigger switch (1).
  • Page 9: Changing The Position Of The Shoe

    Changing the position of the shoe Rotating the rear handle CAUTION. CAUTION. Always ensure that the saw is switched off Always ensure that the saw is switched off and unplugged from the power supply. and unplugged from the power supply. 1.
  • Page 10: General Cutting

    General cutting Plunge cutting 1. Hold the saw firmly in front and 1. Mark the line of the cut. clearly away from you. 2. Choose a point inside the area to be cut out and place 2. Make sure that the blade is the tip of the blade over that point.
  • Page 11: Metal Cutting

    Metal cutting Maintenance Metals such as sheet steel, pipe, WARNING. Always ensure that the tool is switched off and steel rods, aluminium, brass and the plug is removed from the power point before making any copper can be cut with your saw. adjustments or maintenance procedures.

Table of Contents