Security Menu; Boot Menu; Exit Menu - BenQ Joybook L41 Series User Manual

System Time:
• allows you to set the time of the system. Use
<+> or <-> to change the value.
System Date:
• allows you to set the date of the system. Use
<+> or <-> to change the value.

Security menu

Security
The menu contains the security settings, which
safeguard your system against unauthorized use.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
warranty documentation. Should you happen to forget or
mislay the password once set, you will be greatly
inconvenienced in gaining subsequent access to your
Joybook.
Set Supervisor Password:
•
system supervisor's access to the whole BIOS setup utility.
When typing the password, first make sure Num Lock is off,
and then type your password in the entry field and press
<Enter>. Confirm your password by typing it again and
pressing <Enter>.

Boot menu

Boot
The menu contains the boot options and configuration
settings of the boot device. A list of boot devices will be
displayed.
• Use < > or < > to select a device, and then press <+> to
move it up or <-> to move it down.
• Quiet Boot : displays the normal POST messages by disabling
this option, and displays the OEM logo by enabling this
option.
This set of password controls the
• PXE Boot to LAN:boots the computer from LAN.
• HDC Configure as: sets up harddisk controller.

Exit menu

Exit
The menu displays ways of exiting BIOS setup. After
finished with your settings, you must save and exit so that the
new settings can take effect.
Exit Saving Changes
• : saves the changes you have made and
exits BIOS setup. After finishing with your settings, you must
save and exit so that the new settings can take effect.
Exit Discarding Changes
•
the changes you have made.
Load Optimal Defaults:
• loads the default values for all the
items in the BIOS setup utility.
It is recommended that you go into BIOS to load manufacture
defaults, whenever you have installed new hardware
components.
: exits BIOS setup without saving
Using BIOS setup 39