Chapter-9: Troubleshooting - Haier HW70-14F2B User Manual

CHAPTER -9: TROUBLESHOOTING
All repairing operations required for your machine should be
carried out by our authorised service. If your machine re-
quires a repair or if you cannot remove the fault by the help
of the information provided as follows:
• Unplug your machine.
• Turn the water tab off.
FAULT
Your machine does
not start.
Your machine does
not intake water.
(*) See the chapter regarding maintenance and cleaning of
your machine.
POSSIBLE
CAUSE
It is not plugged.
Fuse blown..
Electricity cut-off.
Start/pause button
not pressed.
Programme dial
'stop' position.
The machine door is
not completely closed..
Water tap is turned off.
Water inlet hose
may be twisted.
Water inlet hose
clogged.
Valve inlet filter
clogged.
The machine door
is not completely
closed..
TROUBLE-
SHOOTING
Plug it.
Replace the fuses.
Check mains power.
Press on Start/
Pause button.
Switch the programme
button to the desired
position.
Close the machine
door.
Turn your tab on.
Check water inlet
hose and untwist.
Clean water inlet hose
filters. (*)
Clean the valve
inlet filters. (*)
Close the machine
door.
68