Table of Contents
Advertisement
CHAPTER -9: TROUBLESHOOTING
FAULT
Excessive foam is
formed in the detergent
drawer.
Unsatisfactory
washing result.
POSSIBLE
CAUSE
Excessive amount
of detergent used.
Wrong deter-
gent used.
The contamination de-
gree of your laundries
does not match the
programme you have
chosen.
Amount of detergent
used insufficient.
Laundries in ex-
cess of maximum
capacity put in your
machine.
TROUBLE-
SHOOTING
Press on Start/Pause
button. To eliminate
foam formation, mix a
spoon of softener with
half litres of water, and
pour the mixture in the
detergent drawer. After
5-10 minutes, press on
Start/Pause button again.
In your next washing
operation, Adjust the de-
tergent dose accordingly.
Use detergents
produced only for
automatic washing
machines in your
machine.
Select the programme
appropriate for the
contamination degree
of your laundry. (See
programme table)
Adjust the amount of
detergent based on the
amount and contami-
nation degree of your
laundry.
Load your machine with
laundries, amount of
which will not exceed
maximum laundry ca-
pacity.
70
Hide quick links:
Advertisement
Table of Contents
