10-Troubleshooting - Haier HW110-B14979S8EU1 User Manual

10-Troubleshooting

Many occuring problems could be solved by yourself without specifi c expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
Electrical equipment should be serviced only by qualifi ed electrical experts, because
improper repairs can cause considerable consequential damages..
A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualifi ed persons in order to avoid a hazard.
10.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
:
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min.
:
The washing cycle is fi nished. The appliance shuts off automatically.

  Door is closed because of high water level, high water temperature or spinning cycle.
  The buzzer is deactivated.
  The buzzer is activated.
   The function keys is closed.The programme changing is invalid.
10.2 Troubleshooting with display code
Problem Cause
• Drainage error, water is not fully

drained within 6 minutes.
• Lock error.

• Water level not reached after 12

minutes.
• Drain hose is self-syphoning.
• Water protective level error.

 • Drainage error. Water is not fully drained
in set time. (Refresh programme).
 • Temperature sensor error.
• Heating error.

• Motor error.

26
Solution
• Clean pump fi lter.
• Check drain hose installation.
• Shut the door properly.
• Make sure that tap is fully opened and
water pressure is normal.
• Check drain hose installation.
• Contact the After sales service.
• Clean pump fi lter.
• Check drain hose installation.
• Contact the After sales service.
• Contact the After sales service.
• Contact the After sales service.
EN