Sony MHC-GTR88 Operating Instructions Manual page 24

4
Press REC TO USB B.
"USB"* and "SYNC" light up and
"REC" flashes in the display.
"PUSH ENTER" appears in the
display.
* "USB" lights up for African and Pan
Asian models only.
5
Press ENTER.
Transferring starts when "DON'T
REMOVE" appears in the display.
When the transferring is completed,
both USB device stop automatically.
Transferring a single audio file
during playback from an USB
device to another USB device
(USB-USB REC1 Transferring)
You can easily transfer the audio file on
an USB device that is currently being
played back onto another USB device.
1
Connect a transferable USB
device to the
unit.
2
Press USB, then connect the
USB device you want to transfer
to the
3
Select the audio file you want to
transfer, then start playback.
4
Press REC TO USB B while the
selected audio file is being
played back.
"USB"* lights up and "REC" flashes
in the display.
"PUSH ENTER" appears in the
display.
* "USB" lights up for African and Pan
Asian models only.
GB
24
B port on the
A port.
5
Press ENTER.
Transferring starts from the beginning
of the file when "DON'T REMOVE"
appears in the display. When the
transferring is completed, the audio
file continues to play.
To select the playback source
or transferring destination on
the Sony Ericsson mobile
phone
(W302, W595, W760i, W890i,
W902, W910i only)
When listening to music from a Sony
Ericsson mobile phone or when
transferring music from this system to the
mobile phone, you can select the playback
source or transferring destination as
follows:
– internal memory of the mobile phone.
– Memory Stick
1
Connect the mobile phone to the
B port on the unit and press
USB B.
2
Press OPTIONS on the unit in
stop mode.
3
Turn OPERATION DIAL to select
"USB MEM SEL".
4
Press ENTER.
The memory number of the mobile
phone appears in the display but varies
depending on the specification of the
mobile phone.