Creating Your Own Sound Effect - Sony MHC-GTR88 Operating Instructions Manual

Creating your own
sound effect
You can raise or lower the levels of
specific frequency ranges and then store
up to three user equalizer settings in the
memory.
1
Press EQ BAND/SURROUND
repeatedly to select a frequency
band or surround effect.
2
Turn OPERATION DIAL to adjust
the level or select the surround
effect you want.
Frequency band
3
Repeat steps 1 and 2 to adjust
the level of other frequency
bands and surround effect.
4
Press ENTER.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL to select
a user equalizer number (1~3)
you want to store the equalizer.
Select "EXIT" to cancel storing.
6
Press ENTER.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and
replaced by the new setting.
GB
36
Equalizer level
To call up the user equalizer setting
Press PRESET EQ (or EQ on the remote)
repeatedly to select "USER EQ 1",
"USER EQ 2", or "USER EQ 3".
To cancel the sound effect
Press PRESET EQ (or EQ on the remote)
repeatedly until "FLAT" appears in the
display.