Presetting Radio Stations - Sony MHC-GTR88 Operating Instructions Manual

To program a track or file by using
OPERATION DIAL
1
Perform step 1 to 3 of "Creating
your own program".
2
(For audio files only)
Turn OPERATION DIAL to select
the folder you want, then press
ENTER or NX.
3
Turn OPERATION DIAL to select
the track or file you want.
4
Press ENTER or NX.
The program step number appear in the
display.
Other operations
To
Cancel Program
Play
Delete the last
step from the
program list
Notes
(For CD function only)
• The program list is cleared when you eject the
disc.
(For USB function only)
• The program list is cleared when you:
– perform the erase operation.
– remove the USB device from the
A port or
– switch the USB memory select.
Tips
• The program you made remains in the
system's memory even after it has been
played back. Press NX (or N on the
remote) to play back the same program again.
• If "--.--" appears instead of the total playing
time during programming, this means:
– the total playing time has exceeded 100
minutes.
– you have programmed an audio file.
– the current disc is DATA-CD or USB.
GB
34
Do this
When playback is
stopped, press PLAY
MODE on the remote
repeatedly until "PGM"
disappear from the
display.
Press CLEAR on the
remote when playback is
stopped.
B port.
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly by
selecting the corresponding preset
number.
Use the buttons on the remote for this
operation.
1
Tune in the station you want
(see "Listening to the radio"
(page 20)).
2
Press TUNER MEMORY.
A preset number flashes in the display.
The stations are stored from preset
number 1.
3
Press +/– repeatedly to select
the preset number you want.
If another station is already assigned to
the selected preset number, the station
is replaced by the new station.
4
Press ENTER.
"COMPLETE" appears in the display.
The station is stored.
5
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and
10 AM stations.
6
To call up a preset radio station,
press TUNING MODE repeatedly
until "PRESET" lights up in the
display, and then press +/–
repeatedly to select the preset
number you want.
Preset number