Wb (White Balance) - Siemens CCAW1417-LPI Configuration Manual

9.2.2

WB (White Balance)

Siemens AG
TOUR CONFIG Zoom position of zoom preset
HOME PRESET Press ENTER to save the tour configuration (preset combination)
HOME WAIT Home preset On/Off
END Waiting time after which the camera returns to start position (HOME PRESET)
Move the cursor using the "Far/Near", "Tele/Wide" keys.
Press MENU to enter the next level for configuration.
1 2
<TOUR CONFIG MENU>
01* 02* 03 04 05
06 07 08 09 10
< S
DWELL TIME 010
When ZOOM PRESET is selected, you can adjust the preset zoom position using the "Tele" and
"Wide" buttons.
When a ZOOM PRESET has been selected press the MENU button to save the preset.
<WB MENU>
MODE
R GAIN
B GAIN
FRAME ADJ
END
MODE WB modes:
AWB: Auto White Balance: 2500K – 9500K
WAWB: Wide Auto White Balance: 1800K – 10500K
INDOOR: Indoor white balance mode
OUTDOOR: Outdoor white balance mode
MANUAL: You can change R and B gain manually
CRS (Colour Rolling Suppression): Decrease colour rolling effect; useful in
SHUTTER mode in AE menu
R GAIN Red gain: 0 – 255
B GAIN Blue gain: 0 – 255
FRAME ADJ Since the colour rolling path differs depending on the fluorescent lamp used, it has to
be adjusted individually. To do so, select the WB menu.
After about 10 s, the adjust mode will be finished automatically.
END Back to the next higher menu level
CMD description
* : User-saved preset
< : Deletes the character at the cursor position and
moves one position to the left
S : Save the present tour setting
E
E : Exit
DWELL TIME
Zoom preset dwell time (10 – 180 s)
Camera settings
19
04.2011