NEC WT615 Setup Manual page 31

10
Click [Use the following IP address:], and input [IP address] and [Subnet
mask].
•
If, for example, the [IP address] and [Subnet mask] of the projector are set as shown in
"Example of setting 1" on page 19, set the personal computer as shown below.
•
Example of setting the IP address and subnet Mask
IP address
Subnet mask
10 lick
C
-1
11
Click [OK].
The property window for the wireless network connection will be displayed again.
11 12
Click [Close].
This completes the Ad Hoc connection of wireless LAN on the personal computer (Windows
XP).
5. Setting the LAN Setting of Personal Computer
Projector ( page 19)
192.168.100.010
255.255.255.000
Personal computer (Screen Below)
192.168.100.20
255.255.255.0
10 9
nput
I
-2 -2
5
29