NEC WT615 Setup Manual page 17

Hide thumbs Also See for WT615:

Table of Contents

Setting Wired LAN

Select "Profiles".

"Profile 1" or "Profile 2" can be stored in the memory of the projector as the setting of LAN.

<1> Press the

<2> Use the

the

•

"Easy Connection" is effective to use wireless LAN

Set "DHCP".

Check this check box if the network to which the projector is to be connected automatically

assigns the IP address via the DHCP server.

<1> Press the

the

A check mark will be placed.

•

To clear the check box, press the

•

If "DHCP" is checked, move the highlight to "Reconnect" and press the

ton. Input "DNS Configuration" field as necessary.

•

If "DHCP" is not checked, input "IP Address", "Subnet Mask", "Gateway", and "DNS Con-

figuration" as necessary. After each item has been set, move the highlight to "Reconnect"

and press the

button once to highlight the "Profiles" field and press the

button.

button to highlight "Profile 1" or "Profile 2", and press

button.

button once to highlight the "DHCP" check box and press

button.

4. Setting the LAN Setting of Projector

(

page 19)

button once again.

but-

Table of Contents

Wt610