NEC WT615 Setup Manual page 25

10 9
Select "WEP".
Select whether WEP (encryption) is performed or not.
To perform WEP (encryption), set an encryption key.
•
Disabled ••••••• WEP (encryption) is not performed. There is a danger that the contents of
•
64 bits•••••••••• 64-bit data is used as an encryption key.
•
128 bits •••••••• 128-bit data is used as an encryption key.
•
152 bits •••••••• 152-bit data is used as an encryption key.
Security is reinforced as the number of bits is increased.
10
Select "Key Select".
If "64 bits", "128 bits", or "152 bits" is selected from "WEP", select which of the following
encryption keys, "Key 1" to "Key 4", is to be used.
11
Input "Key 1" to "Key 4".
If "64 bits", "128 bits", or "152" bits is selected on the "WEP" field, input an encryption key.
Set the same encryption key as the access point and personal computer to be connected by the
wireless LAN.
Four types of keys can be input.
Selected Bits
64 bits
128 bits
152 bits
<1> Use the
be input and press the
The software keyboard will be displayed.
communication are monitored.
Alphanumeric
Character (ASCII)
5 characters
13 characters
16 characters
button to select an item for which the encryption key is to
4. Setting the LAN Setting of Projector
Hexadecimal Number
(HEX)
10 characters
26 characters
32 characters
button.
4
23