NEC WT615 Setup Manual page 19

6
Input "DNS Configuration".
Set the IP address of the DNS server of the network to which the projector is connected.
The method of inputting is the same as that of the "IP Address" field.
7
Reconnect the network.
<1> When all the above items have been input or set, use the
to highlight "Reconnect" and press the
8
Finalize the setting.
<1> Use the
ton.
The setting will be stored in the memory of the projector.
4. Setting the LAN Setting of Projector
button to highlight [OK] and press the
button.
button
but-
4
17