NEC WT615 Setup Manual page 23

5
Select SSID from "Site Survey" (if necessary).
A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID
that are to be connected are selected from this list. When SSID is selected from the list, the
"SSID" field and "Mode" field will also be automatically set.
<1> Press the
Searching SSID will begin.
When searching SSID is complete, a list of SSID is displayed.
Icon
••••••••••••••••• Access point
••••••••••••••• WEP setting
<2> Use the
connected.
Press the
button.
If the SSID to be connected is not on the list, press the
To connect SSID for which WEP is set, the same setting must be made on the
projector (
6
Input or edit "SSID" (if necessary).
SSID selected in "Site Survey" are automatically input.
If the highlight is moved to the "SSID" field and the
keyboard is displayed and characters can be input or edited.
The default setting of the projectors is "NECPJ".
button once to highlight "Site Survey" and press the
button.
•••••••••••••••••••••• Personal computer (Ad Hoc)
button to highlight the SSID of the network to be
button once to highlight [OK] and press the
page 22).
4. Setting the LAN Setting of Projector
button.
button is pressed, a software
4
21