Environments Of The Installation Location; Options - Sony BVM-F250A Operation Manual

Professional video monitor
Hide thumbs Also See for BVM-F250A:
Table of Contents

Advertisement

Available languages

Available languages

Environments of the
Installation Location
Illumination environments
The apparent color reproduction on the monitor is greatly
affected by ambient light or glare.
Viewing angle
The ideal viewing angle is within 5 degrees (up/down/left/
right) off the center of the monitor screen when the
operator views the entire monitor screen. Keep the
viewing angle within 15 degrees off the center of the
monitor screen.

Options

For external control
BKM-16R Monitor Control Unit
The BKM-16R is a controller of the BVM-F250A/F170A
and you can control multiple monitors from one controller.
In this manual, the BKM-16R is referred to as the
controller.
For installation
BKM-37H/BKM-38H Controller Attachment
Stand (for BVM-F250A only)
Used to join a BKM-16R and the BVM-F250A.
Using the BKM-37H, you can adjust the monitor angle up
or down.
BKM-39H Controller Attachment Stand (for
BVM-F170A only)
Used to join a BKM-16R and the BVM-F170A.
SMF-700 Monitor Interface Cable
Used to connect the BVM-F250A/F170A to the BKM-
16R.
Input adaptors
The input connector panel is composed by installing the
optional input adaptor into the input option port on the
monitor. Up to four adaptors can be installed to the
monitor.
The input signal type for each connector of the adaptor is
set with the Channel Configuration menu, in accordance
with the configuration of the connector panel.
Note
When installing the adaptor, be sure to perform the
necessary input signal setup with the Channel
Configuration menu. If the setup is not performed, the
adaptors may not function correctly.
For information about the Channel Configuration menu,
refer to the Operation Manual.
For details of each input adaptor, refer to the operating
instructions of each model.
BKM-220D SDI 4:2:2 Input Adaptor
Includes a decoder for serial digital signals (525/625
component). Input/output connectors for two serial digital
channels and output connector for one monitor channel are
equipped.
Environments of the Installation Location / Options
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bvm-f170a

Table of Contents