Sony BVM-F250A Operation Manual page 18

For BVM-F170A only
Attention-when the product is installed in Rack:
1.Prevention against overloading of branch circuit
When this product is installed in a rack and is supplied
power from an outlet on the rack, please make sure that the
rack does not overload the supply circuit.
2.Providing protective earth
When this product is installed in a rack and is supplied
power from an outlet on the rack, please confirm that the
outlet is provided with a suitable protective earth
connection.
3.Internal air ambient temperature of the rack
When this product is installed in a rack, please make sure
that the internal air ambient temperature of the rack is
within the specified limit of this product.
4.Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make sure
that the rack does not achieve hazardous condition due to
uneven mechanical loading.
5.Install the equipment while taking the operating
temperature of the equipment into consideration
For the operating temperature of the equipment, refer to
the specifications of the Operation Guide.
6.When performing the installation, keep the
following space away from walls in order to
obtain proper exhaust and radiation of heat.
Lower, Upper: 4.4 cm (1
Right, Left: 1.0 cm (
For BVM-F250A/F170A
For the customers in Europe, Australia and New
Zealand
WARNING
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.
For LAN connector
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
CAUTION
When you connect the LAN cable of the unit to peripheral
device, use a shielded-type cable to prevent malfunction
due to radiation noise.
For kundene i Norge
Dette utstyret kan kobles til et IT-strømfordelingssystem.
18
3
/ inches) or more
4
13
/ inches) or more
32
Apparatet må tilkoples jordet stikkontakt
Suomessa asuville asiakkaille
Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan
För kunderna i Sverige
Apparaten skall anslutas till jordat uttag
For the customers in the U.S.A.
SONY LIMITED WARRANTY - Please visit http://
www.sony.com/psa/warranty for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY - Please visit http://
www.sonybiz.ca/solutions/Support.do for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.
For the customers in Europe
Sony Professional Solutions Europe - Standard
Warranty and Exceptions on Standard Warranty.
Please visit http://www.pro.sony.eu/warranty for
important information and complete terms and
conditions.
For the customers in Korea
SONY LIMITED WARRANTY - Please visit http://
bpeng.sony.co.kr/handler/BPAS-Start for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.
Pour le BVM-F250A/F170A
Importantes consignes de sécurité
• Lisez ces consignes.
• Conservez ces consignes.
• Tenez compte de tous les avertissements.
• Suivez toutes les consignes.
• N'utilisez pas cet appareil à proximité d'un point d'eau.
• Nettoyez uniquement avec un chiffon sec.
• Ne bloquez pas les ouvertures de ventilation.
Installez l'appareil conformément aux consignes du
fabricant.
• N'installez pas l'appareil à côté d'une source de chaleur
telle qu'un radiateur, une grille de chauffage, un réchaud
ou un autre appareil (y compris un amplificateur)
produisant de la chaleur.
• Ne retirez en aucun cas le dispositif de sécurité de la
fiche polarisée ou une fiche avec terre. Une fiche
polarisée comporte deux lames, dont l'une est plus large
que l'autre. Une fiche avec terre comporte deux lames et
une troisième broche de mise à la terre. La lame large ou
la troisième broche est fournie à des fins de sécurité. Si
la fiche fournie ne rentre pas dans votre prise, consultez
un électricien pour remplacer la prise obsolète.