Related Manuals for Brice 330IK SA
Summary of Contents for Brice 330IK SA
- Page 1 ™ ™ Operation and Safety Manual Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer...
-
Page 2: Safety Issues
SAFETY ISSUES 1. NEVER touch this machine without training and authorisation from your supervisor. 2. Machine MUST BE on solid, level bench/table. 3. Guards MUST BE in place before plugging in and turning on machine. 4. ALWAYS use the three-pronged plug provided. 5. - Page 3 A word to the wise This Manual is really two sets of instructions in one - some sections are relevant to all Brice slic- ers, while other sections only concern a particular slicer or range of slicers.
- Page 4 WHENEVER YOU CARRY OUT ANY PROCEDURE THAT PLACES YOUR HANDS ON OR NEAR THE SLICER BLADE YOU MUST WEAR SUITABLE PROTECTIVE HAND COVERINGS SUCH AS STEEL MESH GLOVES TO PREVENT ACCIDENTAL INJURY FROM THE BLADE. 1.2 Introduction Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer...
-
Page 5: Installing The Slicer
Operation and Safety Manual ™ The Brice Model 330IK SA Semi-Automatic slicer has been designed for environments where The Brice Model a range of different foodstuffs and slicing requirements must be met - from individual slices to large batches (up to 60 slices per minute). Its features include: 330IK SA Gear •... - Page 6 11. With the carriage motor off, return the slicer to manual mode by pushing in the Auto/Manual Carriage Selector knob (17). Turn off the blade motor by pressing the key. The Control Panel 1.4 Introduction Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer...
-
Page 7: Things To Keep In Mind
8. When you have finished slicing, make sure that the meat table is pulled to the front of the slicer and switch off the power at the control panel by pressing the key. Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer Operation 2.1... -
Page 8: Automatic Operation
2. Swing the meat grip (11) over and press down to insert spikes into the foodstuff about to be sliced. The meat grip is not always required, if the foodstuff is heavy enough to self feed down the meat tray. 2.2 Operation Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer... -
Page 9: Cleaning The Slicer
This section deals with cleaning your slicer, including blade cleaning. Cleaning the We recommend that, before cleaning or maintenance tasks are undertaken, the machine operator(s) receive some training from authorised Brice representatives, preferably during the Slicer installation phase. Before carrying out cleaning or maintenance tasks, it is very important that: 1. -
Page 10: Cleaning Schedule
���� ��� ���� ��� The cleaning schedule ���� ���� ������� ������ ���� ����� � ������ ����� ���� ���� ��� ������� �������� ��� ������������ ����� ��� �������� ��������� ����� ������������ �������� 3.2 Cleaning Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer... -
Page 11: Routine Maintenance
This section deals with routine maintenance for your slicer, including blade sharpening. Maintenance We recommend that, before cleaning or maintenance tasks are undertaken, the machine operator(s) receive some training from authorised Brice representatives, preferably during the installation phase. Before carrying out cleaning or maintenance tasks, it is very important that: 1. -
Page 12: Blade Sharpening
2. The sharpener cannot function properly once the blade diameter has been reduced by more than 10mm. Contact your authorised Brice technician to arrange for a replacement once the blade wears to this point. To sharpen the blade: 1. -
Page 13: Electrical Safety
These are not particular or unique to the 330IKSA. If in doubt about a particular fault or problem, the SAFEST course of action is to switch the machine OFF at the powerpoint, and contact a Brice Service technician. Problem... - Page 14 ™ Operation and Safety Manual 4.4 Maintenance Model 330IK SA Semi-Automatic Gear Driven Gravity Feed Slicer...
-
Page 16: Copyright Information
This document may not be reproduced, in whole or in part, by any means without the prior express written permission of the copyright owner. Brice and the BRICE logotype are trademarks of Brice Australia Pty. Ltd. Printed in Australia 25068/330IKSA_man_pdf...