Related Manuals for Brice GPR
Summary of Contents for Brice GPR
- Page 1 Operation and Safety Manual Belt Driven Slicers Light Duty; Belt-Driven; Manual Operation...
-
Page 2: Safety Issues
9. SWITCH OFF AND UNPLUG the machine from its power source before cleaning, sanitising or servicing. 10. USE ONLY the attachments provided by the manufacturer and designed for this machine. YOUR SAFETY IS OUR PRIMARY CONCERN Model GPR Belt Driven Gravity Slicers... -
Page 3: Declaration Of Conformity
1907/2006 Registration evaluation authorisation and 2002/95/EEC (RoHS - Restriction of Hazardous Reach restriction of chemicals in industry Substances). Rule CEn. For the materials and things destined to come into contact with food 1935-2004 Model GPR Belt Driven Gravity Slicers... - Page 4 A word to the wise This Manual is really two sets of instructions in one – some sections are relevant to all Brice slicers, while other sections only concern a particular slicer or range of slicers.
- Page 5 WHENEVER YOU CARRY OUT ANY PROCEDURE THAT PLACES YOUR HANDS ON OR NEAR THE SLICER BLADE YOU MUST WEAR SUITABLE PROTECTIVE HAND COVERINGS SUCH AS STEEL MESH GLOVES TO PREVENT ACCIDENTAL INJURY FROM THE BLADE. Model GPR Belt Driven Gravity Slicers...
- Page 6 The Brice Model foodstuffs and slicing requirements must be met – from individual slices to larger batches. The Model GPR, one of the most versatile on the market is designed for precision slicing. GPR Slicers Available in three blade sizes (220mm, 250mm & 300mm).
-
Page 7: Installing The Slicer
6. Switch the slicer on at the front of the machine. Immediately the ON/OFF switch will light up, showing power is on, and the blade will spin in an anti-clockwise direction. 7. Switch off at the front of the machine. Your slicer is now ready to use. Model GPR Belt Driven Gravity Slicers... -
Page 8: Things To Keep In Mind
6. Repeat step 5 as often as required to obtain the number of slices needed. 7. When you have finished slicing, make sure that the meat table is pulled to the front of the slicer and turn machine off using the ON/OFF switch (7). Model GPR Belt Driven Gravity Slicers... - Page 9 2. Position the last slice device (8) behind the foodstuff so that the spikes of the last slice device press into the cut face of the foodstuff. 3. Continue slicing until the remaining foodstuff has been cut. Model GPR Belt Driven Gravity Slicers...
-
Page 10: Cleaning The Slicer
This section deals with cleaning your slicer, including blade cleaning. Cleaning the We recommend that, before cleaning or maintenance tasks are undertaken, the machine operator(s) receive some training from authorised Brice representatives, preferably during the Slicer installation phase. Before carrying out cleaning or maintenance tasks, it is very important that: 1. -
Page 11: Cleaning Schedule
Wipe down slicing guide, ✔ meat table & centre plate Wipe down all exposed ✔ ✔ surfaces (no disassembly) Clean all surfaces including ✔ ✔ blade (disassemble machine) Model GPR Belt Driven Gravity Slicers... -
Page 12: Routine Maintenance
This section deals with routine maintenance for your slicer, including blade sharpening. Maintenance We recommend that, before cleaning or maintenance tasks are undertaken, the machine operator(s) receive some training from authorised Brice representatives, preferably during the installation phase. Before carrying out cleaning or maintenance tasks, it is very important that: 1. -
Page 13: Blade Sharpening
2. The sharpener cannot function properly once the blade diameter has been reduced by more than 10mm. Contact your authorised Brice technician to arrange for a replacement once the blade wears to this point. To sharpen the blade: 1. -
Page 14: Troubleshooting
™ Operation and Safety Manual This section deals with the problems you may find when using the Model GPR, and the Troubleshooting methods and procedures for solving them quickly and easily. Mechanical or electrical problems during operation Indication Problem Solution... -
Page 16: Copyright Information
This document may not be reproduced, in whole or in part, by any means without the prior express written permission of the copyright owner. Brice and the BRICE logotype are trademarks of Brice Australia Pty. Ltd. Printed in Australia BA268 GPR Series 4/13...
Need help?
Do you have a question about the GPR and is the answer not in the manual?
Questions and answers
Recently purchased 2nd hand GPR250 and thickness dial won't go back to zero. Blade is flush but dial is on 8