Table of Contents
Advertisement
HUAWEI TP3206&TP3218&TP3218S Telepresence
User Guide
Step 3 Enter the telepresence host IP address, connection protocol, service set identifier (SSID), and
touch panel user name and password.
Step 4 Tap Save to connect to the telepresence host.
----End
Follow-up Procedure
After the touch panel is restarted, the telepresence system home screen is displayed, as shown
in
Figure
Figure 3-1 Telepresence system home screen
If you have exited from the Huawei telepresence screen, tap Apps and then
touch panel home screen to access the screen again.
Issue 01 (2013-08-15)
When multiple telepresence hosts are used and the touch panel is already connected to a telepresence
host, you must change connection settings to enable the touch panel to connect to another telepresence
host.
The default touch panel user name and password are hid. To change the password, log in to the
Telepresence System Manager and choose System Settings > Users. To obtain the case-insensitive
SSID, tap Apps > Settings > Wireless & networks > WLAN Settings on the touch panel.
3-1.
The PassCode area is available on the touch panel home screen only when the telepresence system
supports the PassCode function.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Using the Touch Panel
on the
18
Advertisement
Table of Contents
