Working Instructions; Maintenance And Service - Bosch GSH 5 CE Professional Original Operating Instructions

OBJ_BUCH-430-004.book Page 10 Tuesday, March 25, 2008 3:38 PM
10 | English
The data in the following table are recommended
values.
Application
Working roughcast/
light building materials
Removing tiles
Working brick
Working concrete
Changing the Chiseling Position (Vario-Lock)
The chisel can be locked in 12 positions. In this
manner, the optimum working position can be
set for each application.
Insert the chisel into the tool holder.
Push the chisel adjustment ring 3 forward and
turn the chisel to the required position with the
chisel adjustment ring 3.
Release the chisel adjustment ring 3 and turn the
chisel until it latches.

Working Instructions

Vibration Damper
The integrated vibration damper in the main han-
dle and at the hammer mechanism reduces oc-
curring vibrations.

Maintenance and Service

Maintenance and Cleaning
Before any work on the power tool itself,
pull the mains plug.
For safe and proper working, always keep
the power tool and the ventilation slots
clean.
A damaged dust protection cap should be
changed immediately. We recommend hav-
ing this carried out by an after-sales service.
1 609 929 L46 | (25.3.08)
Service Indicator 7
When the carbon brushes are worn out, the pow-
er tool switches itself off. This is indicated ap-
Dial control 6
prox. 8 hours beforehand by the lighting or blink-
ing of the service indicator 7. The power tool
must then be sent to an after-sales service agent.
Addresses are listed in the Section "After-sales
Service and Customer Assistance".
Stand-by Indicator 8
When the mains plug is plugged in and mains
voltage is given, the stand-by indicator 8 must be
lit. When the machine cannot be switched on de-
spite lit stand-by indicator 8, it must be sent to
an after-sales service agent; for addresses, see
section "After-sales Service and Customer
Assistance", page 10.
If the power tool should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an after-sales ser-
vice center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the power tool.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
In case of a claim, repair or purchase of replace-
ment parts or in case of queries or other prob-
lems, please contact your local dealer or Bosch
representative.
Bosch Power Tools