Craftsman 108.27807 Operator's Manual page 76

PROBLEM CAUSE
9. Loose or damaged
Poor speed
wiring.
performance
10. Carburetor out of
(Continued)
adjustment.
11. Engine valves out of
adjustment.
1. Incorrect coolant
Over heating or
level.
over cooling
2. Faulty thermo switch.
3. Faulty thermostat.
4. Inoperative fan
motor.
5. Faulty radiator/
radiator cap.
6. Faulty water pump.
1. Use of high range
Belt Burning
when starting out on
an incline.
2. Insufficient ATV
warm-up.
3. Towing or carrying
loads in high range.
4. Getting ATV stuck in
mud or snow or
climbing over large
objects from a
stopped position.
CORRECTION
filter, refill with fresh fuel.
9. Contact 1-800-643-7332.
10. Contact 1-800-643-7332.
11. Contact 1-800-643-7332.
1. Check coolant level, fill as
necessary.
2. Contact 1-800-643-7332.
3. Contact 1-800-643-7332.
4. Contact 1-800-643-7332.
5. Contact 1-800-643-7332.
6. Contact 1-800-643-7332.
1. When starting out on incline
put ATV in low range.
2. Warm up ATV for at least 5
minutes, then with
trans-mission in neutral,
advance throttle to approx.
1/8 throttle in short bursts, 5
to 7 times.
3. Use low range only when
towing or carrying loads.
4. Shift transmission to low
range carefully; use fast,
aggressive throttle
application to engage
clutch. WARNING:
Excessive throttle may
cause loss of control and
vehicle overturn.
76