Throttle Lever - Craftsman 108.27807 Operator's Manual

Throttle
WARNING
Do not start or operate an ATV with sticking or improperly operating throttle control.
A stuck or improperly operating throttle could cause an accident resulting in injury
or death. Always contact your dealer for service repairs whenever throttle
problems arise. Failure to check or maintain proper operation of the throttle
system can result in the throttle lever sticking during riding and cause an accident.
Always check the lever for free movement and return before starting the engine
and occasionally during riding.
WARNING
Washing or operating the ATV in freezing temperatures can result in water
freezing in the throttle cable conduit and/or on the throttle mechanism. This may
result in the throttle sticking which can cause the engine to continue to run and
result in loss of control.

Throttle Lever

Pressing the throttle lever (1) with your thumb controls engine speed and vehicle
movement. The throttle lever is spring-loaded and engine speed returns to idle
when the lever is released.
Speed Adjustment
1
1
To limit throttle travel and top speed, the ATV is
equipped with a throttle adjuster screw. The
screw can be turned in to lower the top speed
2
and out to increase the top speed. After
adjustment, the locknut must be tightened down
against the throttle housing.
1. Locknut
2. Throttle Adjuster Screw
31