Paradise Datacom P300-VSAT Installation & Operating Handbook page 65

For Turbo FEC the FEC rate selection screen is as follows:
Change, Tx/Rx, Mod/Demod, FEC Rate Menu (Turbo)
The Turbo FEC code rate may be selected from the scroll list of preset rates dispayed on the screen.
pressing YES will accept the current FEC rate and return to the Change, Tx, Modulator menu. This list can
contain up to 31 different rates, but initially only the following are defined (others will be added later):
Screen Description
"0.750 Industry de-facto 3/4 rate"
"0.493 Paradise 1/2 rate"
"0.875 Paradise 7/8 rate"
"0.789 Paradise 3/4 rate"
* Note on processing delay. Use the data rate before the FEC to determine the delay in milliseconds from
the delay in bits. For example at 1Mbps using Rate 0.789 Turbo FEC, the FEC delay is (6498/1000000)
seconds, which is 6.5ms.
P300H
Select Turbo Mode/Code rate, then (YES)
[0.750 Industry de-facto 3/4 rate]
P300 Modem Installation and Operating Handbook
 
Exact code rate
0.750
0.492711
0.875
0.789359
Delay (bits) *
4446
4056
450 (yes 450)
6498
Page 65