250W AC, cabled, non-redundant
Figure 5 highlights the PowerEdge R220 power supply features.
SATA power cables (2)
Dell PSUs have achieved Silver efficiency levels as shown in Table 13.
Form factor
Non-redundant
Thermal and acoustics
The PowerEdge R220 was designed with the goal to offer a class leading chassis depth all while
meeting the acoustical requirements for office environment.
Thermal design
The system's PWM fan is controlled by the iDRAC. The thermal sensor on front control board senses
the ambient temperature and adjusts the fan speed accordingly. In a normal office environment the
fan spins slower, resulting in low acoustics. The fan RPM begins to ramp up with temperature to
satisfy cooling requirements at higher ambient temperatures, and different system configuration
(e.g. RAID card installation).
Optimized thermal management makes PowerEdge R220 cool and quiet with efficiency
improvements that save energy. Benefiting from a smart cooling thermal control algorithm, R220
Dell PowerEdge R220 Technical Guide
PowerEdge R220 power supply
Screw
Power supply efficiency
Output
Class
250W AC
Silver
250W power supply
Power supply
connector (2x4)
Optical drive cable
Minimum efficiency by load
10%
20%
N/A
85.0%
ATX power supply
connector (2x12)
50%
100%
88.0%
85.0%
23