Image Signals - Canon LV-7215U Service Manual

Part 1: General Information

3.3 Image Signals

Computer Input
Digital or analog computer displays are compatible.
Computer Displays will not be detailed her, but there are signal frequencies and
computer displays that are not compatible. (See the user manual for details.)
• Digital RGB
LV-7215/7210
LV-5210
• Analog RGB
LV-7215/7210
LV-5210
• Multiscan System
The vertical and horizontal frequencies of the connected computers Image signal are
detected and the scan system is determined and set automatically.
• Automatic PC adjustment Function
The horizontal dot total, tracking, and screen position can be automatically
adjusted.
DVI Input
• Scanning Systems
D-1080i/D-1035i/D-720p/D-576p/D-480pare compatible.
• HDCP (High-bandwidth Digital Content Protection)Compatibility
The product conforms to the HDCP for encryption and decryption of DVI signals.
* The HDCP standard was developed to prevent unlimited digital copying of video
contents.
Component Input
• Scanning Systems
1080i/1035i/720p/575p/575i /480p /480i are compatible. (Automatic or manual)
Composite Input and S Video Input Color System
• Color System
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N are compatible
With color system setting set to automatic, the projector will automatically select the
system, except for PAL-M/PAL-N.
SCART Input (Optional cable LV-CA31 is necessary.)
The SCART output from a video device can be connected to the Image signal through
the Analog RGB Input (Dsub15).
D-SXGA (compressed), D-XGA, D-SVGA, D-VGA
D-SXGA (compressed), D-XGA (compressed), D-SVGA, D-VGA
SXGA (compressed), XGA, SVGA, VGA, MAC
SXGA (compressed), XGA (compressed), SVGA, VGA, MAC
1-8